Solar Water Heating Systems

Solar water heaters are a great alternative to traditional water heating methods. They are environmentally friendly, provide hot water all year round, and can be installed on any roof.

A solar water heater is a device that uses the sun’s heat to produce hot water for residential use. These devices have been around since the mid 1800s, but have only gained popularity in recent years as people become more environmentally conscious.

Vacuum Tube Solar Water Heating Systems

Vacuum tube solar water heating systems are the most common type of solar water heating system. They use a heat transfer fluid (usually water, but sometimes glycol) that is heated by the sun and then transferred to a storage tank.

A vacuum tube collector is made up of an insulating glass envelope (IGE) with a transparent cover that protects it from wind and rain. The IGE is filled with air or inert gas, which provides insulation and prevents convection currents from carrying away the heat. A vacuum tube collector can be mounted on the roof or ground, depending on its design.

Vacuum tube solar water heating systems components :

  • Curved or flat copper fins are attached to a metal heat pipe that acts as a high-efficiency solar collector. The heat pipes then transfer the energy from the evacuated heating tubes and this cools the building’s air

  • Copper manifold: which is an insulated box and it contains a copper header pipe with dry connect sockets that the heat pipes plug into to protect against corrosion and freezing or high temperature.

  • The solar control system: that prevents ice or frost from forming..

  • Safety valve: It should be ensured that the system is not exposed to high pressure when the water temperature is high.

  • Insulated metal pipes: it connects the hot water tank to the collectors

  • Insulated hot water tank: to ensure a constant supply of hot water even in cold winter days.

  • Water flow pump.

  • Mounting Frame

  • Reflector

  • Extra attachments

Why Vacuum Tube Solar Water Heating Systems ?

Solar energy systems can be a great clean resource for heat, in some cases better than the traditional heating methods. They are incredibly energy-efficient and allow for a nearly zero degree of heat loss as 94% of solar energy goes directly towards the capture in climates where the gap between inner and outer temperatures is considerable.

The system can be scaled down by unplugging a couple of heat pipes. This can be useful in summer when less hot water may be needed and you want to significantly decrease the energy output without sacrificing system performance.

Add Your Heading Text Here

A solar panel water heater is easier and more cost-effective than other equipment such as gas or electric. It also has a higher efficiency rate. Installing a water heater with solar panels is a smart choice for industries that rely on hot water such as restaurants, hotels and motels, fishing boats, and large farms.

Add Your Heading Text Here

The solar collector is a thin and reflective plate which absorbs solar light to heat water. Inside the plate, there are some pipes of different metals which allow the heat to flow more quickly. These are called risers.

Due to the fact that copper pipes heat up when a plate gets hot and then transfers it to heating fluid, your building will have a higher level of temperature.

To maximize heat transfer the risers are welded to the upper surface of the absorber plate.

To create an insulating air space and protect the absorber plate and the risers, they are kept in a box with a sheet of glass or plastic on the front.

Air-baffles are used to prevent heat escape. This is because, after the heat has transferred from the plate to the fluid, there will still be remaining heat that will be able to escape back into the atmosphere. Extra insulation is also important because high-temperature rigid foam and aluminium foil insulation can insulate better compared to standard glass wool or cellulose materials.

Parts of Flat Panel solar water heater :

To collect sun’s rays and heat up the water. Insulated tank with capacity between 100 – 500 liters for domestic use attached to metal mounting.

Auxiliary electric heater is a device that is used for heating water. The temperature of the water in the tank is measured by a sensor and this information is used to control the heater. Auxiliary electric heaters are used in winter or when there are power cuts.

Why Flat Panel solar water heater ?

Flat panel solar water heaters are simpler and easier to manufacture which means they’re generally cheaper than other water coolers. This panel gets installed on the roof, which means less sophisticat equipment is needed. Besides, they come with a warranty of 20 years and are a great way to save energy.

A great option for snowy regions, as it does a better job of clearing away snow than any other alternative.

Contact us now for a free Quotation

+201228871084

info@siscomegy.com